What boats had Mb2a50s fitted?

[Howard]

Well I know the Jaguar 25, the Liesure 23, and the mirage 25 but what other boats?

If you know please let me know as they can then be contacted.

[Howard]

The wing 7.2

[Retail Therapy]

A Viking 28

[ajp]

i have a vivacity 24 with one fitted

[koe]

Alo Mikkel 26"
http://artific.org/public/bilde.php?page...d=1&rekke=

MB2
http://artific.org/public/galleri_tag.ph...s.userid=1

[Ian]

Abbott 33, about 40 boats made in Sarnia Canada in the early to mid 80s

http://www.abbottboats.com/a33.htm

Howard Wrote:Well I know the Jaguar 25, the Liesure 23, and the mirage 25 but what other boats?

If you know please let me know as they can then be contacted.

[quaich]

I have recently purchased a cox marine 21 with a mb2a/50s engine and looking for a rewind starter assembly complete.

[HarryS]

I bought a BB10m (http://www.bb10m.dk) in spring this year. It is equiped with a MB2A/50S saildrive. I don't know if this engine was built into more of the BB10m... I have the ship in the Netherlands, Ijsselmeer.

Kind regards, Harald

[gkmulder]

In Holland the engine was fitted in a lot of Friendship 22's
The boats were build in Balk, Friesland,

[Howard]

[quote=quaich]
I have recently purchased a cox marine 21 with a mb2a/50s engine and looking for a rewind starter assembly complete.
[/quote

I can supply a rebuilt one if you would like, it will take about a week from your order to provide it, Howard

[quaich]

quaich Wrote:I have recently purchased a cox marine 21 with a mb2a/50s engine and looking for a rewind starter assembly complete.

Howard Wrote:[quote=quaich]
I have recently purchased a cox marine 21 with a mb2a/50s engine and looking for a rewind starter assembly complete.
[/quote

I can supply a rebuilt one if you would like, it will take about a week from your order to provide it, Howard

[jim foster]

I have a MB2/50S installed in my US Yacht 27 built by Bayliner in 1980 I am in Portland, Oregon USA

[Howard]

Thanks Jim, do let other Bayliner owners know if possible. This will help us all as the service is only part time at present, thanks

[nautica]

Hello, my name is Stephan from Germany. I live in Bremen (Beck´s Town) and i bought a Nautica 24 with the Volvo Saildrive. I ám trying to refit Boat and Engine. I have a lot of Problems with the Motor, because the Seller was an old man, who dissambeld some things on the Motor and i have to fit it. Hope you can help to solve my Problems: The Engine is not runnig, because there is no spark on the spark plugs. Is it possible, to run the engine without mounted the control Pannel? The man had cut the Harness and i am searching to bring the lines on the right ports. The temp. gauge with Holder is not mouted. What is the right place to mount this part?

Thank you for answers and support!

Stephan

[Howard]

Yes I have run the engine without the control panel but the problem is that you can not stop it, as the stop button is on the panel and the alarms system is essential for safe running. I do have all these parts and I could assemble a complete wiring harness and control panel with alam system if you want me to, Howard


Sorry for the slow reply.